Research & Academic

Research & Academic

Research Projects Guided at M.E. Level
  • Automated Interactive Ductile Detailing of Structural R.C.C. elements using AutoCAD, AutoLISP & VB6 in April 2005.
  • Seismic Evaluation and Retrofitting of concrete framed structures in June 2006.
  • Seismic Assessment and Retrofit of RC framed structures in June 2007.
  • Capacity design concept of a RCC Building in June 2008.
  • Analysis & Design of a RCC Building with conventional method and capacity design concept in October 2008.
Other Research Activities
  • Workshop on grouting Technology for dam foundation – 1 day in 1991, Baroda.
  • National seminar on remote sensing – 2 day in 1994, sponsored by CEPT, Ahmedabad.
  • Workshop on wind engineering & Analysis Of tall Structures – 1 day in 1995.
  • Seminar on Cement in Civil Engg. Practice – 1 day in 1995.
  • National Seminar on Stress-Strain Characteristic of Engg. materials – 2 day in 1996.
  • Modern methods of analysis & design of foundations & superstructures – 14 days in 2000.
  • A short course on Seismic effects on soil foundation structure interaction & mitigation methods – 2 days in 2001.
  • Handling post Earthquake Challenges in Gujarat – 1 day in 2001 Organized by BMC, Baroda.
  • A short course on “Seismic design & Retrofitting of Reinforced Concrete building” conducted at IIT, Kanpur – 5 days, June 2001.
  • International workshop on high volume fly ash in cement/concrete – 1 day in 2002, Ahmedabad sponsored by Ambuja Cement & CEPT.
  • A short course on “Seismic design of Bridges” conducted at Gandhinagar sponsored by Directorate of Technical Education, Gujarat State – 4 days, December 2002.
  • A visit to study Shake Table Test organized by NCPDP/UNCRD EDM at Radhanpur on 10/08/2002 at Bhansali Trust’s campus.
  • E-Course on Indian Seismic Code IS 1893-2002 (Part-I) during January 13-25, 2003.
  • A short course on Indian Sesmic Course IS 1893-2002 (Part-I) at Ahmedabad during March 2003-2 days.
  • A one week Training Programme on “ Earthquake Resistant Design of R.C.C. Building at IIT, BOMBAY on July-7 to July-11, 2003.
  • A one week Review workshop for Resource Material in Engineering Education at IIT-KANPUR during 25-29 August,2003.
  • A two days seminar on “ Rapid assessment of Seismic Vulnerability of Urban Building Blocks” at IIT-BOMBAY during Sept.3-4,2003
  • AICTE-ISTE sponsored short term training program on “Eq. Resistant design & construction” for 2 weeks (Nov. 17 to Nov. 28, 2003) at BBIT, V.VIDYANAGAR.
  • “In service course in Methodology of teaching & evaluation” from 25/02/04 to 6/03/04 (10 days) at CASE, M.S.U., Baroda.
  • A short term course on “Structural dynamics in Eq. Engg.” From 8-13, March, 2004 at IISC,Banglore, sponsored by
    MHRD & NPEEE.
  • ISTE-INSDAG sponsored one week STTP on “structural steel design” at BBIT, V.VIDYANAGAR from March 29-April 3, 2004.
  • National seminar on Geotechnical Engg. Emerging Techniques on August 14, 2004 organized by IGS, BARODA.
  • “International Conference on Fibre Re-enforced Concrete” held at Chennai, Sept 17-20, 2008.
Research Papers Published
  • “Seismic Assesment & Retrofit of RC framed Structure” in SEC-2008 at Chennai, Dec 18-20, 208.
  • “Analysis & Design of RC Building with Capacity Design Concept” in 4th International Conference & Exhibition on Innovative World of Concrete 2008 at New Delhi, Dec 11-14, 2008.
  • “Seismic Evaluation & Retrofit of RC Building” in NUCONE-2008, 27-29 NOV, 2008.
Research Papers Published in International Journal
  • Patel V. R and Pandya I.I: “Seismic Evaluation & Retrofit of RCC Building For C shaped building”, International Journal of Earth Science and Engineering (IJEE) ISSN-0974-5904 Indexed in CAS-USA-Ref No: 172238, Vol.-03, No.03, May-2010,pp.489-494.
  • Vinu R. Patel, I.I. Pandya: “Micromechanical Measurement of Concrete Strain to evaluate principle strain distribution in Steel Fiber Reinforced Cement Concrete Moderate deep Beams across its width and depths”  International Journal of Applied Engineering Research, Dindigul, volume 1, no.2, October 2010. ISSN-0976-4259
  • Vinu R. Patel, Atul Bansal and Dr. I.I. Pandya: “Shear strength of steel fiber reinforced concrete moderate deep beams without stirrups”, American Society of Civil Engineers-IS section, August-2010, pp.6-10.
  • Vinu R. patel, Pandya I. I.: “Evaluation of shear strain distribution in polypropylene fiber Reinforced Cement Concrete Moderate deep beams”, International Journal of Civil and Structural Engineering, Vol.1, No.3, 2010, ISSN 0976-4399.
  • Vinu R. Patel, Dr. I. I. Pandya, Sandeep C. Patel : “Prediction of Shear Strength of PPFRC Moderate Deep Beams Using Strut-and-Tie Models”, International Journal of Engineering research and Applications (IJERA), vol.1, issue 2, pp.149-152, ISNN:2248-9662.
  • Vinu R. Patel, Dr. I. I. Pandya: “Comparative study of shear capacity of RCC with Fibrous Moderate Deep beams”, International Journal of Earth Science and Engineering (IJEE), ISSN-0974-5904 (Indexed in Scopus Compendex and Geobase (products hosted on Engineering Village) Elsevier, Amsterdam, Netherlands, Chemical Abstract Services-USA, Geo-Ref Information Services-USA) published by Cafet-Innova Technical Society, Hyderabad, June-2012.
  • Vinu R. Patel, Dr. I. I. Pandya : ” Evaluation of shear strength of SFRC    Moderate deep beams using Strut-and Tie Models”, at International Journal  of Modern Engineering and research (IJMER)
  • Vinu R. Patel, Bhavin Mojidra, Dr. I. I. Pandya : ” Ultimate shear strength of fibrous moderate deep beams without stirrups”, at International Journal  of Engineering Research and Development,  volume.1, no.1, ISSN-2278-067X, May-2012.
  • Vinu R. Patel, Nikunj S. Darji, Dr. I. I. Pandya : ” Experimental Study of cracking behavior for SFRC beams without stirrups with varying a/D ratio”, at International Journal  of Engineering Research and Development,  volume.1, no.2, ISSN-2278-067X, May-2012.
  • Vinu R. Patel, Dr. I. I. Pandya : ” Ultimate shear strength of fibrous moderate deep beams without stirrups”, at International Journal of Applied Science and Engineering Research, volume 1, No.1, ISSN-2277-9442, May 2012.
  • Vinu R. Patel, Dr. I.I. Pandya : “Micro Mechanical Measurement of concrete strain to evaluate principal strain distribution in RCC Moderate Deep Beams across its Width and Depth”, IOSR Journal of Engineering, Volume 2, Issue 11, PP 53-60, p-ISSN: 2278-8719, e-ISSN: 2250-3021, November 2012.
  • Vinu R. Patel, Dr. I.I. Pandya : “Evaluation of Shear Strain Distribution in Reinforced Cement Concrete Moderate Deep Beams”, British Journal of Engineering & Technology, Volume 1, No.3,, PP 11-20, p-ISSN: 2278-8719, e-ISSN: 2250-3021, December 2012.
  • Harsh Pandya, Vinu Patel et. al: “Thermo luminescence studies of river sands of Gujarat”, International Journal of Luminescence and its Applications, Vol.3, No.1, Jan 2013, Article ID:021, page-83-86, ISSN:2277-6362.
  • DR.V.R.PATEL, RAJESH PRAJAPATI: ”Effect of different position of shear wall on deflection in high rise building”, International Journal of advances in Engineering and Technology, pp. 1848-1854, Vol.6, Issue 4, Sept 2013. ISSN: 22311963.
  • Parthraj Puranik, Deval Vasavada, Dr. Vinu Patel:,’Use of Woven Fabrics for Strengthening of Reinforced Concrete Beams, Int. Journal of Engineering Research and Applications (ijera) , ISSN : 2248-9622, Vol. 4, Issue 3 (version2), March 2014, pp.52-58.
  • Vinubhai R. Patel, Nishit B. Panchal: “ Diagrid Structural system: strategies to reduce lateral forces on high-rise buildings”, International Joutrnal of Research in engineering and Technology”, pISSN:2321-7308, eISSN:2319-1163, Volume-03, Issue:04, April-2014, pp.374-378.
  • Mohammad H. Jinya, Dr. V. R. Patel:,” Analysis of RC frame with and without masonry infill wall with different stiffness with outer central opening”, International Joutrnal of Research in engineering and Technology”, pISSN:2321-7308, eISSN:2319-1163, Volume-01, Issue:04, Jan-2014, pp.01-07.
  • Mohammad H. Jinya, Dr. V. R. Patel:,” Analysis of RC frame with and without masonry infill wall with different stiffness with outer central opening”, International Joutrnal of Research in engineering and Technology”, pISSN:2321-7308, eISSN:2319-1163, Volume-03, Issue:06, June-2014, pp.76-82.
  • Nishit B. Panchal, Dr. V. R. Patel, Dr. I.I.Pandya:” Optimum Angle of Diagrid structural System”, International Joutrnal of engineering and Technical Research(IJETR), ISSN:2321-0869, Volume-2, Issue:6, June-2014, pp.150-157.
  • V. R. Patel, Gargi Sinhal, G. S. Grewal:, “ Seismic Analysis of Transformer Using Different Mode Combonation Methods”, International Journal for Scientific Research and Development, Volume 3, Issue 4, June 2015.
  • V. R. Patel, Gargi Sinhal, G. S. Grewal:, “ Comparision of Seismic Response of an Insulator Bushing using Time History and Response Spectrum Methods”, International Journal of Engineering Research and General Science, Volume 3, Issue 3, May-June 2015.
Research Papers Published in National Journal
  • Subhash C. Patodi and Vinu R. Patel: “Development of Processors for Finite  Deformation Analysis of Axisymmetric Plates”  in Journal of Structural Engineering, SERC, Madras, Vol.19,No.2, July 1992,pp.53-59.
  • Vinu R. Patel, Ankur Rana and Dr. I.I. Pandya: “Shear Strength of Polypropylene Fiber Reinforced Concrete Moderate Deep Beams without Stirrups”, Journal of Structural Engineering, SERC, CHENNAI, Vol.37, No.5, Dec-2010, Jan-2011, pp.364-368.
  • Vinu R. Patel, Dr. I. I. Pandya, Hitendra B. Solanki: ”Cracking Behavior of PPFRC Beams without stirrups with varying shear span by depth ratio” at The Indian Journal of Technical Education,  Special issue of the first national conference in the Emerging Vistas of Technology in 21st Century, organized by Gujarat Technological University, Ahmedabad, April, 2012, ISSN-0971-3034.
Research Papers Published at International Conferences
  • Vinu R. Patel, Dhara Shah, Rachana B. Modi: “Analysis & Design of RC building with Capacity Design Concept”, International conference on Innovative World Concrete, ICI-IWC-2008, December 2008, Delhi.
  • Vinu R. Patel, Atul Bansal and Dr.I.I. Pandya: “Study of Crack Patterns, Crack width profile and Modes of failure for SFRC Moderate deep beams “ , International conference on emerging Trends in Engineering ICETE-2010, 20-21 Feb-2010, Dr. J.J. Magdum College of Engineering,  Kolhapur.
  • Vinu R. Patel, Desai Niraj, I.I. Pandya: “Study of Crack Patterns and Modes of Failure of RCC Moderate Deep Beams”, International conference on Materials, Mechanics and Management (IMMM -2010), January 14-16, 2010, at the college of Engineering, Trivandrum 695016, Kerala, India.
  • Vinu R. Patel, I.I.Pandya: “Evaluation of Shear Strain Distribution In Polypropylene Fiber Reinforced Cement Concrete Moderate Deep Beams” at Interantaional Conference on current Trends in Technology (NUiCONE-2010), at Nirma University, Ahmedabad, 9–11 December, 2010
  • I.I.Pandya and V.R. Patel: “ Comparative Study of Cracking Behavior and Modes of Failure for RCC and SFRC Moderate Deep Beams “, ICIWSE-2010-Interantaional Conference on Innovative World of Structural Engineering, at Govt. College of Engineering, Aurangabad, Maharashtra, India, September 17-19, 2010.
  • I.I. Pandya and V.R. Patel: “ Capacity Based Design Of Reinforced Concrete Structure “, ICIWSE-2010-Interantaional Conference on Innovative World of Structural Engineering, at Govt. College of Engineering, Aurangabad, Maharashtra, India, September 17-19, 2010.
  • Harsh Pandya, Vinu Patel et. Al: “Thermoluminesence Technique as a Tool in Cement quality control”, Proceedings of the International Conference on Luminescence and its applications (ICLA-2012),7-10 February, 2012, Hydrabad, India.
  • Harshdutta Pandya, Vinu Patel: “ Seismic Evaluation & Retrofitting of RC Building Using Push Over Analysis”, Proceedings of International Conference on Civil Engineering and Infrastructural Issues in Emerging Economies”  ICCIEE 2013, 27-28 February, 2013, School of Civil Engineering, SASTRA University, Thanjavur, Tamilnadu. ISBN 978-93-5104-853-4
  • I. I. Pandya, Vinu Patel, Y. H. Gandhi: “Thermoluminesence Studies of various Gujarat River Sands”, Proceedings of the International Conference on Luminescence and its applications (ICLA-2015), February 9-12, 2015, Bengaluru, India. ISBN 978-93-82570-48-6
Research Papers Published at National Conferences
  • S.C. Patodi, V.R. Patel: ”Fortran Graphics Environment for Nonlinear  Bending of Circular Plates presented at Indian  Science Congress, Jaipur in January 1994.
  • V.R. Patel, Anita Shimpi, I.I. Pandya: “Seismic Assessment and Retrofit of RC  Framed Structure” , National Conference, Structural Engineering Convention SEC-2008, Chennai, December 2008.
  • V.R.Patel, I.I.Pandya: “Seismic Evaluation & Retrofit Of RC Building” National conference on current Trends in Technology (NUCONE-2008), Nov. 2008 at Nirma University, Ahmedabad.
  • Vinu R. Patel, Priyanka, I.I.Pandya: “Automated Interactive Ductile Detailing of R.C.C. Structural Elements using  Autocad, Autolisp & V.B.6” at  National conference on Advancement in Civil Engineering, Sept.11-12, 2009, PIET(Parul Institute of Engg & Technology), Vadodara.
  • Vinu R. Patel, Rana Ankur, Dr.I. I. Pandya: “Study of Crack Patterns, Crack width profile and Modes of failure for PPFRC Moderate deep beams “at national conference CRDCE-10, 21-22 Jan-2010, SVIT, VASAD.
  • Vinu R. Patel, I.I.Pandya:  “Seismic Evaluation and Retrofitting of RC framed structure” at National conference CRDCE10, 21-22 January 2010, SVIT, Vasad.
  • Vinu R. Patel and Dr. I.I.Pandya: “COMPARATIVE STUDY OF CRACKING BEHAVIOR AND MODES OF FAILURE FOR PPFRC AND SFRC MODERATE DEEP BEAMS” at National Conference on Fly ash/Futuristic Materials in Civil Engineering Construction For Sustainable Development , BVM V.Vidyanagar, 12 August, 2010.
  • V.R. Patel and I.I. Pandya: “Experimental Study of Cracking Behavior and Modes of Failure for RCC and Fibrous Moderate Deep Beams”, Department of Civil and Structural Engineering,  Annamalai University, Annamalainagar 608 002, Tamil Nadu, India. THE SEVENTH STRUCTURAL ENGINEERING CONVENTION 08 – 10 December, 2010.
  • V. R. Patel, Dr. I.I. Pandya and Sandeep Patel: “Prediction of shear strength of SFRC moderate deep beams using strut-and-tie models”, National conference on Fibre Reinforced Concrete Global Develoments”, 13-14 February, 2012 at Nagpur, India.
  • Dr. Vinu Patel, Harsh Pandya:, “Innovative approach for Retrofitting of infilled Masonary building”, International workshop on performance, protection and strengthening of structures under extreme loading, August 26-27, 2013, at National Institute of Engineering, Mysore, Karnataka.
  • Dr. Vinu Patel, Harsh Pandya:, “Innovative approach for upgradation of RC structure using Push over analysis”, International workshop on performance, protection and strengthening of structures under extreme loading, August 26-27, 2013, at National Institute of Engineering, Mysore, Karnataka.
Special Lectures Delivered
  • Lecture delivered at Training to Engineers and Architects in “ Earthquake Engineering and Disaster Resistant Construction Technology “, The Institute of Engineers India, Vadodara, on the topic of  “Post Earthquake actions for buildings and Infrastructure”- 19-20 June 2009.
  • A special lecture delivered in the “National Programme for Capacity Building of Architects in Earthquake Risk Management “ NPCBAERM, on August 28-30, 2009 organized by Department of architecture, FTE, Baroda on the topic of “Philosophy& Principles of RCC framed structure”.
Seminars & Conferences Attended
  • Workshop on grouting Technology for dam foundation -1 day in 1991, Baroda.
  • National seminar on remote sensing – 2 day in 1994, sponsored by CEPT, Ahmedabad.
  • Workshop on wind engineering & Analysis Of tall Structures – 1 day in 1995.
  • Seminar on Cement in civil engg. practice – 1 day in 1995.
  • National Seminar on Stress-Strain Characteristic of engg. materials -2 day in 1996.
  • Modern methods of analysis & design of foundations & superstructures- 14 days in 2000.
  • A short course on seismic effects on soil foundation structure interaction & mitigation methods – 2 days in 2001.
  • Handling post Earthquake Challenges in Gujarat – 1 day in 2001 Organized by BMC, Baroda.
  • International workshop on high volume fly ash in cement/concrete – 1 day in 2002, Ahmedabad sponsored by Ambuja Cement & CEPT.
  • A short course on “Seismic design & Retrofitting of Reinforced Concrete building” conducted at IIT, Kanpur – 5 days, June 2001.
  • A short course on “Seismic design of Bridges” conducted at Gandhinagar sponsored by Directorate of Technical Education, Gujarat State – 4 days, December 2002.
  • E-Course on Indian Seismic Code IS 1893- 2002 (part-I) during January 13-25,2003.
  • A visit to study Shake Table Test organized by NCPDP/UNCRD Edm at Radhanpur on 10/08/2002 at Bhansali Trust’s campus.
  • A short course on Indian Sesmic Course IS 1893-2002 ( part-I ) at Ahmedabad during March 2003-2 days.
  • A one week Training Programme on “ Earthquake Resistant Design of R.C.C. Building at IIT, BOMBAY on July-7 to July-11, 2003.
  • A one week Review workshop for Resource Material in Engineering Education at IIT-KANPUR during 25-29 August,2003.
  • A two days seminar on “ Rapid assessment of Seismic Vulnerability of Urban Building Blocks” at IIT-BOMBAY during Sept.3-4,2003.
  • In service course in Methodology of teaching & evaluation from 25/02/04 to 6/03/04 ( 10 days) at CASE, M.S.U., Baroda.
  • A short term course on “ Structural dynamics in Eq. Engg.” From 8-13, March,2004 at IISC,Banglore, sponsored by MHRD & NPEEE.
  • AICTE-ISTE sponsored short term training program on “ Eq. Resistant design & construction” for 2 weeks (Nov. 17 to Nov. 28,2003 ) at BBIT, V. VIDYANAGAR.
  • ISTE-INSDAG sponsored one week STTP on “ structural steel design” at BBIT, V.VIDYANAGAR from march 29-April 3, 2004.
  • National seminar on Geotechnical Engg. Emerging Techniques on August 14,2004 organised by IGS, BARODA.
  • National seminar on Geotechnical Engg. Emerging Techniques on August 14, 20s04 organized by IGS, BARODA.
  • NPEEE short term course on “ Earthquake Resistant design of RC Buildings at IIT Roorkee, during July-24-29,2006.
  • SEVENTH RILEM INTERNATIONAL SYMPOSIUM (BEFIB 2008) HELD AT CHENNAI, SEPT.17-20, 2008.
  • 4TH International conference of ICI-INNOVATIVE WORLD OF CONCRETE held on December 11-14, 2008 at Delhi.
  • NUCONE 2008 held at Nirma University of Technology, Ahmedabad during November 27-29, 2008.
  • 6th Structural Engineering Convention during December 18-20, 2008 held at SERC, Chennai.
  • National Training Course on Chemical Sealing, Water Proofing Compounds and Grouting/Deep Injection (SEWAGI-09), 27 June, 2009.
  • AICTE sponsored Staff Development Programme on Advanced Design Of Steel Structure using (Revised) IS:800-2007 from 3rd-7th August 2009 at SVNIT, Surat.
  • Seismic Evaluation & Retrofit of RCC Building For C shaped building , International Conference on ACSGE- 2009, OCT-25-27, BITS Pilani, India.
  • International Conference at Trivendrum 14-16, January 2010
    National Conference at Vasad, 21-22-January, 2010.
  • International Conference at Kolhapur, 19-20-February-2010.
  • International conference at Hydrabad ICEE-2010, 21-22 august 2010.
  • International Conference at Aurangabad ICIWSE-2010, 17-19 September 2010.
  • International Conference at Ahmedabad NUiCONE-2010, 9-11 December 2010.
  • National Conference at BVM, Vidyanagar, 12 August 2010.
  • International Conference on Luminescene and its Application, February 9-12, 2015 at Bangalore, India.
M. E. Dissertation Guided
  • Priyanka., “Automated Interactive Ductile Detailing of Structural R.C.C. elements using AUTOCAD, AUTOLISP & VB6”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, in April 2005.
  • Anita Simpi., “Seismic Evaluation and Retrofitting of Concrete Framed Structure”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda in June 2006.
  • Patel Viraj., “Seismic Assessment and Retrofit of R.C. Framed Structures”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, in June 2007.
  • Deepa Prabhu., “Capacity Design Concept of a RCC Building”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, in June 2008.
  • Rachna N. Gandhi: ”Analysis & Design of a RCC Building with Conventional method and Capacity Design Concept in October 2008.”
  • Solanki Hitendra B., ”A Comparative Study of Cracking Behavior of RCC & Fibrous Moderate Deep Beams without Stirrups”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, July-2012.
  • Darji Nikunj S., “Evaluation of Shear Strength of RCC & Fibrous Moderate Deep Beams without Stirrups”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, July-2012.
  • Mojidra Bhavin C., ”A Comparative Study for Prediction of Ultimate Shear Strength of Fibrous Moderate Deep Beams”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, July-2011.
  • Patel Mahesh., ”A Comprehensive Study of Crack width and Crack patterns profile of Fibrous Moderate Deep Beams”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, July-2011.
  • Kahar Ravi., “A Comprehensive Study of Shear Parameter of Fibrous Moderate Deep Beams with various span to depth ratio”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, July-2011.
  • Dave Nirvank D., “Study of Shear Parameters of Moderate Deep Beams with Polypropylene Fibers without Stirrups”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, July-2010.
  • Patel Sandeep C., “Prediction of Ultimate Shear Strength of Fiber Reinforced Concrete Moderate Deep Beams Using Strut-And-Tie Models”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, June-2010.
  • Rana Ankur N., “Critical Study of Shear Parameters of Fibrous Moderate Deep Beams with Respect to Various Span to Depth Ratio”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, July-2009.
  • Bansal Atul N., “Mechanical Measurement of Shear Parameters of Fibrous Moderate Deep Beams with Respect to Crack Patterns and its Distribution”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, July-2009.
  • Trivedi Hardik R., “ Scope of concrete Mix Design as per IS 10262-2009”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, June-2012.
  • Prajapati Rajesh J., “ A comprehensive study of parameters affecting an analysis and design of high rise building”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, June-2013.
  • Kanodiya Kinjal C., “ Mix design of High strength concrete using mineral and chemical admixtures as per IS 10262-2009”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, June-2013.
  • Puranik Partraj R., “ Use of Woven Fabrics for the strengthening of Reinforced Concrete Beams”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, June-2013.
  • Pandya Harshdutta I., “ Seismic Performance Evaluation of Gravity load designed RC exterior beam-column sub assemblage”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, June-2013.
  • Panchal Nishit B., “ Diagrid Structural System for tall structures”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, July-2014.
  • Jinyawala Mohammad H., “Seismic Analysis of RC Building with and without infill wall”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, July-2014.
  • Pratima Om Prakash., “Enhancement of the geometry of Rail section to Improve the Fatigue Life”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, -2014.
  • Gargie :, “Seismic Analysis And Comparative Study Of Different Mode Combination Methods For Generalised Structures”, Dissertation Thesis, Faculty of Technology & Engineering, M.S. University of Baroda, -2015.